How to Wipe a Chromebit (Factory Reset)

Most issues with a Chromebit can be resolved by performing a developer wipe. The following article provides instructions on how to perform these steps:

 

Parts Required

Before starting, gather the following parts:

1. USB Keyboard

2. Paperclip

 

 

Step 1

Turn off the Chromebit by removing the power cable.

power.png

 

 

Step 2

Connect a USB Keyboard to the front of the Chromebit:

usb.jpg

 

 

Step 3

Locate the recovery button on the back of the Chromebit, and insert the paperclip into the indicated hole. While the paperclip is inserted into the hole, reconnect the power cord to the Chromebit.

recovery_button.jpg

 

 

Step 4

As the screen boots up, a yellow exclamation point will appear. Press Ctrl + D on the keyboard

done4.png

 

 

Step 5

When the below screen appears, press the recovery button with the paperclip again:

done5.png
 

 

Step 6

When the below screen appears, press the spacebar on the keyboard, then press Enter to confirm

done6.png
 
 
 
 
Step 7

Once Enter is pressed, the below screen will appear, and the Chromebox will reboot

new_1.png

 

 

Step 8

Once powered on, the Chromebox will display the first setup screen. Press the Tab key on the keyboard to navigate to the "Select a Network" section. After configuring your WiFi connection, tap on "Continue":

done.png

 

 

Step 9

Please read the Google OS Terms carefully, and then hit “Accept and Continue”

done1.png

 

 

Step 10

On the login screen appears (see below), press Ctrl + Alt + E on the keyboard to switch to the “Enterprise Enrollment” screen

done2.png

 

 

 

Step 7

Once on the Enterprise Enrollment Screen, enter the login credentials for the Wondersign Service being used:

done3.png

 

Step 8

After successful enrollment, the below screen will appear. Press Enter to proceed

wipe_5.png

 

 

Step 9

The Chromebit will automatically install and launch the Wondersign application

ws5.png

 

Please Note: Depending on which Wondersign service you logged into in step 11, the screen above will be slightly different, but will still feature a plan white background, and a status of the application's launch.

 

 

Step 14

Once the application is launched, the device will download any updated, and return to normal operation. In some situations, a pairing code may appear. If this happens, follow the instructions below.

Write down the pairing code and log in using your Wondersign account at https://my.wondersign.com. Go to the Devices section, click on Activate New Player and enter the pairing code to activate the player. Once the device is paired, it will play a demo Wondersign video until content is assigned to the playlist. For instructions on adding content to your device, visit the following help article: Adding Content to your Playlist

 

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.